Ürün ayrıntıları:
Ödeme & teslimat koşulları:
|
Ürün adı: | YY / T0691-2008 Tıbbi Maske Sentetik Kan Penetrasyon Test Cihazı | Sıvı fırlatma hızı: | 450cm / s; 450cm / s; 550 cm / s; 550 cm / s; 635 cm / s 635 c |
---|---|---|---|
güç: | AC220V 50HZ | Meme çapı: | .80.84mm, uzunluk 12.7mm |
Püskürtme mesafesi: | (300 ± 10) mm | Standartlar: | GB19083-2010, YY 0469-201, YY / T0691-2008 |
Vurgulamak: | aşınma direnci test makinesi,iplik büküm test cihazı |
YY / T0691-2008 Tıbbi Maske Sentetik Kan Penetrasyon Test Cihazı
Genel bakış:
The mask synthetic blood penetration tester is suitable for the measurement of the spatter penetration performance of medical mask synthetic blood. Maske sentetik kan penetrasyon test cihazı, tıbbi maske sentetik kanının sıçrama penetrasyon performansının ölçümü için uygundur. It can be used by medical inspection departments, safety inspection departments and scientific research units. Tıbbi muayene departmanları, güvenlik muayene departmanları ve bilimsel araştırma birimleri tarafından kullanılabilir.
Principle
The medical mask sample was supported on the test device, and 2 mL of synthetic blood was sprayed from a cannula with an inner diameter of 0.84 mm in a horizontal direction toward the mask to be tested at a distance of 300 mm. Tıbbi maske numunesi test cihazında desteklendi ve 2 mL sentetik kan, 0.84 mm iç çapa sahip bir kanülden, test edilecek maskeye 300 mm mesafede yatay bir yönde püskürtüldü. Simulate the scene where the mask is sprayed with blood from the perforated blood vessels, and observe the penetration of synthetic blood on the other side of the mask. Maskenin delikli kan damarlarından kanla püskürtüldüğü sahneyi simüle edin ve maskenin diğer tarafındaki sentetik kanın nüfuzunu gözlemleyin. The medical mask samples were tested at the liquid ejection speeds of 450 cm / s, 550 cm / s, and 635 cm / s, respectively. Tıbbi maske örnekleri, sırasıyla 450 cm / s, 550 cm / s ve 635 cm / s sıvı çıkarma hızlarında test edilmiştir. Record the test results for each injection speed. Her enjeksiyon hızı için test sonuçlarını kaydedin.
Geçerli standartlar
GB19083-2010: Tıbbi koruyucu maskeler için teknik gereksinimler;
YY 0469-2011: cerrahi maskeler;
YY / T0691-2008: Bulaşıcı patojen koruyucu ekipman (sabit hacim, yatay sprey) için tıbbi maskelerin sentetik kan penetrasyonuna karşı test yöntemi
Özellikler:
Test ortamı | Temperature (21 ± 5) ℃; Sıcaklık (21 ± 5) ℃; relative humidity (85 ± 10)% bağıl nem (85 ± 10)% |
Püskürtme mesafesi | (300 ± 10) mm |
Meme çapı | .80.84mm, uzunluk 12.7mm |
Sıvı fırlatma hızı | 450cm / s; 450cm / s; 550 cm / s; 550 cm / s; 635 cm / s 635 cm / s |
Güç | AC220V 50Hz |
İlgili kişi: Ms. Fiona Zhong
Tel: +86 135 3248 7540
Faks: 86-0769-3365-7986